Posts filed under ‘Theory’

Bashar talking about Nikola Tesla

Nikola Tesla And Free Energy

Q: Could you tell us a little bit about Nikola Tesla and who he was?

B: He was Nikola Tesla. (AUD: laughter) And that individual simply recognized the connection of the idea of the primal energy vibrations that were inherent in your electromagnetic fields upon your planet. He understood that they could always be channeled and transformed into whatever type of energy was necessary for whatever your imagination so conceived.

Q: I recently watched a movie about his life and they put forth the idea that he had developed a system whereby energy would be free…

B: Yes.

Q: … to everyone.

B: Yes.

Q: And you would merely need to put up an antennae.

B: Yes.

Q: So, is that available to us?

B: Of course.

Q: Okay.

B: Do you wish to build it?

Q: It sounds exciting.

B: Then go ahead. Rely upon the seven and one half cycles per second Earth frequency; and recognize as that individual recognized, that a transmission tower that would vibrate at that frequency would create a wavelength that is radiating outwards from that tower in circular fashion, exactly, coincidentally, the same as the diameter of your planet.

Therefore it would reach the equator, go to the other pole of the planet, bounce back and create a set of vibrational harmonic resonances with the entire planet, that would activate, crystallize and energize your entire electromagnetic field. Allowing you always, through any conductive material inserted within the ground, to be able to draw upon that energy. It is like turning your entire planet into a generator.

Q: A very interesting idea. Could you suggest where I might find reading material please?

B: You will find it.

Q: Okay. And how tall are we talking about the tower being?

B: You will find out. Again draw from the wealth of information around you and trust your own synchronicity. Also, do not forget that at this time, that particular consciousness is also taping into those who are taping into him, and will assist.

Q: Did he reincarnate again?

B: Not really.

Q: Could you explain the seven and one half cycles again?

B: Simply you will find that the circumference of a planet divided into what you call the speed of light, will give the cycles per second in the frequency of the world.

For it simply is the equational relationship to why the idea of any given material body exhibits the frequency that it does. Because you create the idea of the speed of light to be the representation of the primal energy pulse within your third density vibration.

In other words, what you call one hundred and eighty-six thousand, three hundred miles per second, divided by the twenty-five thousand miles circumference, will give you seven and one half. Seven and one half cycles per second.

Q: I see.

B: All right.

Q2: So, could we construct the tower on the moon in the same way and get all the energy we need by its frequency?

B: If you are on the moon.

Q: Well, you know they’re always talking about how difficult it would be to set up a life-station on the moon and…

B: We understand what you are saying.

Q: Sure.

B: Yes, it is a good idea, in your terms. You can also, in your terms, convert the energy, and beam it to your planet. You can utilize your moon as a generating station.

Q: Well, if we could have this idea on Earth, why would we need to do that?

B: In this way you may find, that because of the systems you have set up upon your Earth now, the system we are now discussing would probably disrupt them. Therefore, if you were to set it up upon your moon, you could convert it at your own leisure away from all the systems you now have upon Earth, and simply convert it, and beam it to where you wish to. Without burning out the systems you have.

Q: Sure. Okay, thanks.

B: Thank you!

Advertisements

March 14, 2011 at 9:51 pm 3 comments

Combining the STA with a Pyramid

I’ve been wondering exactly where the power inputs and outputs to this STA are. I’ve been sparking it (starting it up) by quickly touching the top and bottom of the STA with household 120V AC current. The idea is that this will make it start electromagnetically resonating, and thanks to its shape, it will start to create a self-amplification effect. It’s sorta like a bell that continues to keep ringing after you initially strike it. Great, but how do you get power out of it? Well Bashar mentioned that it acts like a transformer and transformers require two nearby non-physically-touching coils to work. Our STA does have two coils, but they’re touching so it won’t work as a transformer. So if it’s going to function as one, we’re going to need another coil for it to induce a current upon.

Secondly, Bashar has mentioned previously, “This is the first component of a device that will allow you to tap into the electromagnetic field and convert directly into different kinds of energy that you can use.” Furthermore, “In order to have any effect in your reality at all, this device as we have just described it must stand at least as large as the following dimensions: It must be able to fit precisely underneath an imaginary 3-sided pyramid that is 3 feet tall.”

He could have said “It needs to be at least X feet tall, but he specifically mentioned it in relation to the pyramid.” So I’m guessing that’s another clue as well.

So it’s certainly possible that this STA will ultimately be running inside a pyramid-shaped structure.

March 12, 2011 at 2:57 am 1 comment

Simulating the STA Magnetic Field

So Bashar mentioned that this STA (space-time antenna) is like a capacitor and an inductor, both of which require a steady and continuous flow of AC current to function. It sounds like we will need to start the STA up with an external source of AC current and this device will begin resonating in such a way that it will amplify our initial external input of current. Hopefully the energy that it transforms down from higher level energy will be enough to cycle back into the STA to get it to continue to function. At the same time, I’m hoping there’s excess energy that we’ll be able to tap into and pull out of the antenna, using to power other devices. So the idea is that this becomes a self-sustaining device, producing excess power that we can remove from the system.

Anyways, at this point I’m going back over electromagnetic theory and trying to figure out how the magnetic field will look once we start running a current through it. For example, here’s what the magnetic field lines will look like when current is passed through a straight coil called a solenoid:

Magnetic field in a straight coil of wire

Magnetic field in a straight coil of wire

(Image credit: NDT Resource Center)

You can see that the strongest area of the magnetic field is inside the core of the solenoid.

Now our design is going to be a bit different of course, but I’m guessing it’ll still be somewhat similar in that the magnetic field’ll be strongest in the core. Curious how the unique shape of the STA will create a magnetic field, I’ve been looking into ways of simulating the design in software. My friends on the STA Discussion Board shared a list of EM simulation software. Working through that list, one of the programs I tried was Vizimag. After contacting the developer and him helping me get started (thank you!!), I was able to put together simulation models for this STA.

First off we have the magnetic field for just one cone operating independently:

Single cone coil magnetic field

Single cone coil magnetic field

The magnetic field of single cone-shaped coil looks pretty simple to understand and is pretty much what we’d expect, looking at the cylindrical solenoid magnetic field shown earlier.

To get a better perspective, let’s look at a color mapped version of the magnetic field.

Single Cone Magnetic Field

Single Cone Magnetic Field

We can also add some contour lines to this image for a bit more definition.

Single Cone Magnetic Field with contour lines

Single Cone Magnetic Field with contour lines

Looking at this, we can see that the magnetic field gets stronger inside the cone the closer we get to the pointy apex.

Now when we add the second cone through the first, things get a little bit more complex. Here’s how the magnetic field for our STA’s double cone-shaped coil looks:

STA magnetic field (click to see it larger)

STA magnetic field

If you visualize the STA on an XY axis broken up into 4 quadrants, you get 4 small cones each pointing towards the middle of the STA, one small cone in each quadrant. Magnetically speaking, each one of the 4 smaller single cone antennas performs similar to our large single individual cone shown above. Interesting…

To make the overall magnetic field easier to visualize, let’s look at a color mapped version. The brighter and hotter the colors, the more magnetic field you’re getting. The darker and blacker the region, the less magnetic field is created when we run a current through the STA.

STA Colored Magnetic Field

STA Colored Magnetic Field

Looking at this, we can see that the majority of the magnetic field is occuring closest to the actual wires themselves. The 4 smaller cones we talked about earlier is the next most dense area. The core is definitely a dead zone.

To help illustrate this even further, let’s add some contour lines.

STA Colored Magnetic Field with contour lines

STA Colored Magnetic Field with contour lines

Looking at this, it’s easier to see where our dead zones are: The far corners of the image, the center of the STA, and also a few dots surprisingly close to the coils themselves.

For those of you who want to run the simulations yourself, you can download a copy of Vizimag (30 day free trial available) and download the model for the single cone and/or double cone STA design.

March 7, 2011 at 11:24 pm 3 comments

Bashar Explaining More About the Antenna

In the session titled “Take Action” from Oct. 12, 2008, Bashar talks with a fellow experimenter named Kevin who built a jig which you can use to wrap the copper wire/tube around.

You can download and listen to the full ~5 minute MP3 by clicking here.

Below I’ll share some relevant notes and quotes from the talk. Again, you can listen to the complete audio yourself by clicking the mp3 link above.

The coils need to be insulated. Kevin mentions using insulating paint for the insulation.

The STA is in some sense a capacitor and a transformer.

Bashar: “Once you initiate a certain kind of electrical current through it, you allow it to become vibrationally sensitive, because of its shape, to higher frequency energies which are then, in a sense, harmonically attracted to it and begin coursing along the same route. Once the higher frequency energies begin coursing along the same route, it sets up a self-reinforcing vibration that then can be amplified in a variety of ways and transformed, stepped down and transformed into electrical energy or various kind of energy that you can tap and use for your devices on your planet.”

Kevin: So you need to kick start it with an AC pulse. Then it will start resonating, driving itself, and then we can tap energy from it. Bashar: Yes.

Bashar: “This is the very beginning and very early experimentational form. This will improve and this will become more sophisticated, but first it is necessary to do the experimentations at this level in order to then see that you’re getting some effect which will then guide you to the next stage of refining it.”

Kevin: There are quite a number of inventors that have devices that are at the very beginning stages that show some “anomalous” energy as well.

Bashar: The “higher frequency energy” that it taps in to comes from what has been euphemistically referred to as the “template level reality” or “lower astral plane.”

Bashar: “Enjoy your experimentation!”

To listen to the above talk in full, you can download and listen to the MP3 by clicking here.

March 7, 2011 at 1:57 am Leave a comment

Existing Devices that Tap into Schumann Resonance Frequencies

Googling around, I found a number of different antenna designs that can actually detect, measure, and record the varying Schumann resonance frequencies.

Large designs:

The first design is a 200 turn octoloop. It looks like this.

200 turn octoloop

200 turn octoloop

His antenna construction information and signal processing information are available here. After doing this, he built a second device which he says is what the “professionals” use to measure the Schumann resonance frequencies. Rather than 200 turns, it consists of 69,300 turns of copper wire around steel bars.

69,300 turn Induction coil

69,300 turn Induction coil

Using each of these two devices, he was able to detect and measure the Schumann resonance frequencies. The second design, the straight induction coil with far more turns, created a stronger and more well-defined output.

Here’s what he recorded with these two devices:

Detecting schumann resonance frequencies

Detecting schumann resonance frequencies

Much more detail and explanation is available on his website.

One thing I found interesting is that he clearly shows the Schumann resonance frequency hitting 7.8 Hz in 2001, not the 11-12 Hz that Gregg Braden was supposedly referring to.

Tiny coils with thousands of loops

Next, here’s a guy who builds a number of different smaller devices that can detect these frequencies. He aims to do it with devices that cost under 50 euros. Some cost more, others less. They are in the neighborhood of 25-3200 loops and they wound up looking spools of thread.

1600m long spool of thin bare copper wire

1600m long spool of thin bare copper wire

What interests me the most about this design is its small size, light weight, and long lengths of copper wire. This spool weighs just 0.5kg and yet it uses 1600m (5250 feet) of 0.2 mm diameter bare copper wire.

The largest design that he shares, which he says is 50cm squared, consists of 3200 turns, 6400m (21,000 feet or 4 miles) of copper wire, uses 0.3mm diameter copper wire, and weighs 4kg. It cost 160 euros.

Schumann resonance frequencies with 6400m spool

Schumann resonance frequencies with 6400m spool

Again, there’s multiple different sizes that this guy uses of various length wires and of course different costs. You can see all the information from his writeup, including more explanation and other designs, as well as his tests on his website.

Conclusion

So anyways, what I really like about these is that you have people who are detecting these frequencies and are able to measure them. Plus, it doesn’t necessarily take a lot of money to do it.

I also found it interesting that you don’t have to have a set length of copper wire to “tune in” to the exact frequency. You don’t have to frequency match the size of the antenna to the frequencies you want to tap into.

Now what I’m curious about is how the double interpenetrating cone shape effects this whole process. Perhaps it’s what helps create the self-reinforcing vibration that Bashar talks about. The devices above are simply passive receivers “listening in” to Schumann resonance frequencies. The one we want to build apparently needs to be “sparked” or started up to get it to begin vibrating/resonating and then from this point, we can tap it for electricity.

February 16, 2011 at 10:04 pm 4 comments

Schumann Resonance, What It Is and How It Changes

So it seems like the antenna’s functionality has to do with the Schumann resonance. Basically what happens is there is a cavity between the surface of the earth and the inner edge of the ionosphere 55km up. The earth behaves as an enormous circuit and there’s actually a 200,000 Volt difference between the two points. This voltage difference is responsible for lightning bolts that travel between the earth’s surface and up into the atmosphere. Between these two points you’ll find quasi standing waves called Schumann Resonances with frequencies between 6 and 50 cycles per second, specifically 7.8, 14, 20, 26, 33, 39, and 45 Hz, with a daily variation of +/- 0.5 Hz. (source)

Schumann resonance around the earth

Schumann resonance around the earth

Long story short, the earth functions as a giant electrical circuit and there’s electrical energy in the air. The idea with the antenna, at least in my understanding at this point, is that we can tap into this electromagnetic energy and convert it into electricity.

In an amusing way, it’s kinda like how they got the 1.21 gigawatts of power from a lightning bolt in the movie Back to the Future. But in this instance, we’re not looking to capture the energy produced by a lightning bolt, but tap into the electromagnetic energy that’s already all around us, the same energy that lightning bolts use.

Now evidentially, according to Gregg Braden, the Schumann resonance frequencies of the earth are actually changing. The frequencies of the earth are rising as we approach 2012. These changes are discussed here. Though this article looks to be written pre-2003, at the time of its writing it was saying the earth is currently around 12 Hz and by the time we reach 2012, we should be at 13 Hz.

In terms of the antenna design, I’m basing the length of the antenna’s wire on the Schumann resonance. I was thinking that it was 7.83 Hz and that this was a fixed number. However, after this research, it looks like it was 7.8 +/- 0.5. Not only that, this number is continuing to rise. So if we’re designing an antenna with the length based upon this variable number, it doesn’t look like one antenna design will be effective for all of time.

Note: There’s another website about the Schumann Resonance and its changes here.

Note 2:  The current agreed circumference of the earth is 24,901.55 miles. Dividing this into 186,282.4 miles/second (speed of light in a vacuum) gives 7.481 cycles per second.

February 16, 2011 at 8:17 pm 8 comments

Bashar’s audio explanation of the antenna’s design

Okay so here’s an audio explanation of the antenna’s design.

Bashar’s audio explanation of the antenna design

To summarize what’s contained in the clip, here’s what’s discussed:

Tachyon energy:

The vibration of the particle we call tachyons vibrate at a frequency that allows it to operate as another dimension altogether.

Can we use tachyon energy to create electricity?

Yes you can, but you don’t really have to go beyond your own electromagnetic field to do this. You don’t have to tap into other dimensions of that kind of frequency when you have the electromagnetic field of your own planet that can supply you with all the electricity necessary.

Explanation of this antenna’s design:

This is one of the first devices that will allow us to tap into the earth’s electromagnetic field and convert it to energy.

Take a piece of heavy insulated copper wire.

Create a spiral going up in a cone shape and then another going back down through the first cone. Have the two cones connected.

In order to have any effect in your reality at all, this device must stand at least as large as the following dimensions: Must be able to fit precisely underneath an imaginary 3-sided pyramid that is 3 feet tall.

My notes:

So my understanding of what he’s saying is that the absolute minimum dimensions must be such that it can fit underneath a 3-sided pyramid, presumably a 3-foot tall equilateral triangle. It can be larger but this is the minimum size for it to work.

I did the math and that works out to an antenna that’s 1.98 feet tall with a base diameter of 1.174 feet. That said, this is the minimum and we can go larger. Given the fact that we need thousands of coils, we’ll need something larger than 2 feet tall.

The height to base diameter ratio is 1.688 : 1.

So, for example, a 5 foot tall antenna would have a base diameter of 2.96 feet.

February 16, 2011 at 8:14 pm 11 comments

Older Posts


Calendar

November 2017
M T W T F S S
« Apr    
 12345
6789101112
13141516171819
20212223242526
27282930  

Posts by Month

Posts by Category